- 1 Overview
- 2 Decide
- 3 Release notes:
- 4 Prepare
- 5 Upgrade
This is my guide/template to upgrading Fabric OS (FOS) – Firmware – on the Brocade SAN Switches. If you have any additions, comments or questions please go ahead and comment or if you have any questions you can find my e-mail on https://guldmyr.com. The post has been updated over 188 times according to my WordPress revisions, first update in January 2011.
This article was originally built from my experience with HP branded Brocade SAN Switches – not with any other OEM or pure Brocade switches. I have however since beginning this document gotten experience with other vendors.
I do not think others are different except for licenses and some default fabric.ops.
I made a comparison of two downloads of the 6.3.1b Fabric OS Firmware (one via IBM and one from HP). You can find a link to the “IBM” firmware and release notes after 6.x in that article too. I found that they are very similar and the HP firmware works on the IBM switch and vice versa. Another example is that firmware gotten from HDS works on an HP branded Brocade switch.
When you see 7.2.x this means any version in the Fabric OS 7.2.x series. For upgrades, this would generally mean the latest available in that series (like 7.2.1g for 7.2.x or 8.0.2d for 8.0.x) unless of course there is a problem with the latest. Sign up for your vendor’s security and update alerts to get notified about new releases.
Carefully plan the upgrade, it takes time but it is rewarding and worth it.
Updates in this article:
2017-03-10: 8.x has been out for a while
2017-04-29: new links to Brocade FOS target path and better links for where to fetch firmwares
2017-05-03: 8.0.2b and added links to Upgrade Guides for 8.0.0 and 7.4.0)
2018-01-01: 8.1.2a and 7.4.2b
2018-02-08: 7.4.2c and 8.0.2d
2018-06-15: 8.2.0a and 8.1.2d and 8.0.2e
2018-10-11: fixing some links, Brocade is now Broadcom so some links are not working anymore surprise. Some HP links no longer work so removed those too.
2018-12-07: 7.4.2d and 8.0.2f and 8.1.2f
2019-04-18: FOS Target Path on Broadcom. From a reader got a link to NetApp's Brocadeassist portal where newer firmware can be found than on IBM's. Some more link updates and link to 8.2.1b
2019-04-19: More link fixes. FOS 6.x - 8.x firmwares can all be downloaded from the brocadeassist portal.
2019-04-20: 8.1.2g and 8.2.1b on IBM release notes so updated links
2019-07-17: BlueChris in a comment found a nice HPE link to older Firmwares!
2019-08-23: 8.2.1c is on NetApp's link but there are no release notes - I'd pass2
2019-11-21: all links to firmware downloads don't work right now. Only one I have found is to HPE, but there you need support contract. Found a public link? Help out other people in the comments please. I have a cache myself up to 7.4.x but I'm not sure about the legalities.
2020-05-10: people are sharing links in the comments. Many thanks! Also some new releases, 8.2.2 is out.
2020-09-27: 9.0.0a got released in August
One major release at a time is required for the upgrades after 5.2.x, see details below at the release notes section.
If you have to upgrade many steps, you should upgrade to the latest in the series (or if it's very new, probably safest to go with the second newest, just check the release notes of the newest to make sure nothing related is fixed).
If the switch is on 5.1.x you can go directly to 5.3.x.
What I usually recommend is this path:
5.0.1d -> 5.2.3 -> 5.3.2c -> 6.0.1a -> 6.1.2c -> 6.2.2g -> 6.3.2e -> 6.4.3h > 7.0.2e > 7.1.2b > 7.2.1g > 7.3.2a > 7.4.2f > 8.0.2f > 8.1.2g > 8.2.2b > 9.0.0a
It's also possible to upgrade from a version earlier than 6.4.1b to 7.0.x or from 7.0.x to 7.2.x - but this is a disruptive upgrade (meaning ports will go offline/online during upgrade).
Brocade now has a document that describes a process of determining the 'ideal' version of Fabric OS you should be running. It is called Brocade FOS Target Path.
Yet one more official document to help is the Brocade Fabric OS Features and Standards Support Matrix, 8.2.x
There is also a section (Recommended Migration Paths to FOS ) in the release notes describing how to get to the release you're reading notes for. In addition to these, there are Upgrade Guides from Brocade, at least for newer Fabric OS ( 7.4.0 and 8.0.0).
There are newer releases being released every now and then, in several series at the same time. You can think of it as releasing updates for Windows XP and 7 at the same time.
For example, in February 2011 6.4.1a and 6.2.2e were released by HP. You can see this on HP's site if you look at the date next to the download. Quite often Fabric OS versions are not released by the OEMs at the same time, for example "Customer Notice of 7.1.0a release 25th of March 2013" HP released 7.1.0a before IBM.
Which is the recommended one? Usually it's the latest one in the highest series that the switch supports. If you have storage from more than one vendor you may want to check with all and see if they all support the version you want to upgrade to. Vendors certify their equipment with different firmware versions. If you have a tape library, ask the vendor if they have a recommended / list of certified versions.
HP: HP B-series Connectivity stream (available in HP SPOCK).
Brocade: "Brocade FOS Target Path"
Other: Contact them for their compatibility matrices, for example IBM, HDS, EMC, Fujitsu.
Brocade also has their own "Brocade Fabric OS 7.x Compatibility Matrix" which lists compatibility with other vendors.
You could in principle also say that (some blades in directors are excepted from these generalizations):
2G cannot upgrade to Fabric OS 6.x
4G and 8G can be on Fabric OS 6.x
All 4G except some 4/8 & 4/16 (that's 200E) and HP's P- and C-class 4G blade switches (4012 & 4024) can run 6.4.x
8G can run Fabric OS 6.4.x
8G and above can run Fabric OS 7.x
16G (Gen5) needs to be on Fabric OS 7.x or Fabric OS 8.x
32G (Gen6) and 64G (Gen7) needs to be on Fabric OS 8.x or Fabric OS 9.x
Do you want to use the latest one in each series? Probably.
Do check for published advisories and the release notes in the firmwares.
Some models or blades may work on 7.0.x and not on 7.1.x or vice versa.
Fabric OS 7.3.x supports all hardware that supports 7.2.x.
Basically you need to read the release notes for at least the version you are upgrading to, to confirm that it supports your switch.
- 5.x and 6.x at HPE's http://whp-aus2.cold.extweb.hp.com/pub/softlib/software12/COL22074/co-86832-6/FOS-Drawer_Statement.htm
- New Link for some older 5.3-8.0.x from HPE: https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-fd389e31ce584b35911249126f
- 6.0.x can also be found here: ftp://ftp.hp.com/pub/softlib/software10/COL22074/
- For FOS 7.x
- For FOS 8.x
- NetApp's Broadcom/Brocade link: http://www.brocadeassist.com/public/NetAppRelease
- This has more documents and newer firmware than the IBM one.
If you go to downloads for HP's 4/16 there is a link that also takes you to the older FOS firmware. If you don't click through it also only have the firmware that this switch supports. So the latest on there at the moment is 6.2.2f.
On the link above you can also download HP's branded NA (Network Advisor, previously known as DCFM - Data Center Fabric Manager), see notes about that below.
If you click on manuals on the left side you will also be able to download release notes and other guides and references.
5.0.x firmware can also be found at http://ftp.hp.com/pub/softlib/software12/COL22074/co-86832-6/FOS-Drawer_Statement.htm
6.x, 7.x and 8.x. can be found in the IBM and NetApp links.
Firmware Upgrade Order
You also probably want to decide on an order to upgrade the firmware on the switches.
It's possible to do it via DCFM (now called Network Advisor, used to be something else) one switch at a time or even in parallel. I'd advice against doing it in parallel. One at a time and one step at a time seems the most cautious one. It's not too bad to run a SAN with switches in different firmwares. One idea is to have all switches of one model on the same firmware. If you need to upgrade in several steps, do one step at a time.
Also, switches that are of higher importance like Principal Switch, Core Switches or Seed Switches for DCFM/NA. Should you start with these or perhaps start with another switch of less importance to make sure the upgrade goes smoothly?
With more recent firmwares (6.4 and 7.x) it's possible to jump more than one hop - if you are ok with disruptions in the network. Nice if you need to upgrade switches that aren't in production.
Brocade release notes in .pdf
Notes from the release notes:
Upgrading from Fabric OS 5.0.x to 5.2.3 is supported
Upgrading from Fabric OS 5.1.x to 5.3.1a is supported, but upgrading from Fabric OS 5.0.x or a previous release directly to 5.3.1a is not.
Upgrading to Fabric OS 6.0.0b is only allowed from Fabric OS 5.3.x. (6.0.0c is a special upgrade version, only meant to be used in between firmware upgrades)
Upgrading to Fabric OS 6.1.2c is allowed only from Fabric OS 6.0.0b
Upgrading to Fabric OS 6.2.2f is allowed only from Fabric OS 6.1.0a or later.
Upgrading to Fabric OS 6.3.2e is allowed only from Fabric OS 6.2.0a or later.
Upgrading to Fabric OS 6.4.3f is allowed only from Fabric OS 6.3.x. You can upgrade non-disruptively from 6.2
Upgrading to Fabric OS 7.0.2 can be done non-disruptively from Fabric OS 6.4.1a or later.
Upgrading to Fabric OS 7.1.2 can be non-disruptively upgraded from 7.0.x and 7.1.x. With caveats: For example, any previously existing error log entries with FOS v7.1.0 will be permanently lost once upgraded to FOS v7.1.2.
Upgrading to Fabric OS 7.2.x can be done non-disruptively from 7.1.x. Disruptively from 7.0.x is supported.
Upgrading to Fabric OS 7.3.x can be done non-disruptively from 7.2.x. Disruptively from 7.1.x is supported (see the FOS_UpgradeGuide_v730.pdf and the Brocade Release notes).
Upgrading to Fabric OS 7.4.x can be done non-disruptively from 7.3.x. From 6.4.x with firmwarecleaninstall
Upgrading to Fabric OS 8.0.x can be done non-disruptively from any Brocade 16G (Gen 5) platform and all blades in the Supported blades table running any FOS v7.4 firmware. From 7.3.0 with "firmwaredownload -s"
Upgrading to Fabric OS 8.1.x can be done non-disruptively from Brocade platform running 8.0.2 or later. From 7.4.x disruptively with "firmwaredownload -s".
Upgrading to Fabric OS 8.2.x can be done non-disruptively from Brocade platform running 8.1.0a or later. From 8.0.x disruptively with "firmwaredownload -s".
Any Brocade platform listed in the Supported Device section running any FOS 8.2 version can be non-disruptively upgraded to FOS 9.0.0
About non-disruptively: This means you can go to 7.0.xfrom earlier than 6.4.1a but ports will go offline during the upgrade.
See the release notes or Upgrade Guides for more details.
DCFM: Data Centre Fabric Manager / BNA: Brocade Network Advisor .
From 6.2.2a release notes:
With the introduction of Fabric OS 6.1.1, certain features and functions were removed from Web Tools (resident in the firmware) and migrated to the DCFM management application. HP recommends that, before you upgrade to Fabric OS 6.1.1x or later, if DCFM is not running on your fabric, you review the Web Tools functionality moved to DCFM, page 29 in these release notes and take note of what has changed so you can assess the impact on your fabric.
Fabric OS 7.x cannot be managed by DCFM 10.4 or BNA 11.0. You need BNA 11.1.0, see the release notes for 7.x.
Brocade Network Advisor 12.4.0 or later is required to manage switches running FOS 7.4.0 or later.
Brocade Network Advisor 14.0.1 or later is required to manage switches running Fabric OS 8.0.1 or later
Updates to documents
Sometimes Brocade releases updates to the manuals without actually updating the manuals. On HP's page you can find them as "Documentation Updates", "Fabric OS Administrator's Guide Update".
Fabric Watch and MAPS with FOS v7.3
Users running Fabric Watch for switch monitoring in FOS v7.3 are advised to convert to MAPS monitoring before upgrading to FOS v7.4. If you don't, Fabric Watch will stop working.
Also the APM have been replaced with Fabric/Flow Vision.
See the release notes of the firmware for the specifics. For example Fabric OS 8.0.2 cannot be in the same fabric as for example HP C-Class 4/12 FC switches (4024) and one must use Fibre Channel Routing.
Download old Brocade Fabric OS Firmware.
Basically, you need to update in steps.
To get FOS 5.2.1b and 6.0.0c firmware: Contact OEM Vendor or Brocade. I've found that two vendors have the firmware available online for free: HP and IBM, see below:
Eventually after looking around on HP's old pages we found to http://ftp.hp.com/pub/softlib/software12/COL22074/co-86832-6/FOS-Drawer_Statement.htm - this link sometimes changes.
Link to IBM's page for downloading FOS 6 firmwares. This has firmwares going back all the way to FOS 2.6, it even has Fabric OS 6.0.0c and 5.2.3. On the page they have listed release notes and a little further down there is a link called "Release 6 Firmware".
Actually, if you click on 'Release 6 Firmware' you are taken to a page on brocade.com where you can find many different firmwares, including 5.x and 7.x
IBM also have a link about FOS 7.x and FOS 8.x
Also note that some features does not exist/work on older Fabric OS. For example on Fabric OS 5.1.x DHCP and SCP may not work (which forces you to use static IP and ftp).
Equivalent Product Names
Page with the equivalent Brocade and HP product names.
Page with the model number as seen in switchshow and HP's model and Brocade's model. This is a good one.
Page for correlating IBM and Brocade product names.
HP recommend that you upgrade one fabric and one switch at a time.
Waiting a week or at least a couple of days after you upgrade the first fabric is a good idea - gives you time to see if anything went wrong, if you can fix it and if you can do anything different next time.
See HP SPOCK for more details in regards to compatibility and interop modes.
The HP B-series Connectivity Stream lists the recommended firmware and all the supported ones for each switch model. It also has a list of the supported SFPs. Find it by clicking on "Switches" in the left-hand navigation pane under the "Other Hardware" section. The Connectivity Stream is great and it is updated often so I will not link directly to it. You need an HP Passport to log on to HP SPOCK - it is free to create and you do not need a contract or product in warranty.
Other vendors have similar matrices. HP for example does not have a list stating which Fabric OS firmware is supported with which HP P6000 firmware. The idea is that you go with the general recommendation of Fabric OS firmware.
Do read the release notes for the firmware(s) you decide on: for example not all 4GB SAN-switches can run the 6.4.x FOS. The 8- and 16-port 4Gbps switches (Brocade 200E) do not run 6.4.x or 6.3.x.
Only 8Gb and 16Gb switches can run the 7.x.x FOS.
The release notes also have the fixes, enhancements, upgrade paths and supported switches.
Generally the Brocade versions of the release notes are more verbose when it comes to fixes, but if you have an HP branded it might be easier to use the HP one as that has the HP names of the products. Also it might be hard to find the Brocade release notes if you do not have a contract with Brocade. Other vendors (like IBM/Fujitsu/HDS) provide you with the Brocade version of the release notes. You can find the release notes from their support pages.
Do consider updating OS patches, HBA drivers/firmware, management softwares and storage drivers/firmware. For example Qlogic had driver updates to their drivers that prevent HP blades from getting stuck in G_port after a reboot. Another for Qlogic FC cards was to not write a partition table on Dell servers at 2TB on the LUN (not so nice for > 2TB disks)..
SANLoader is an unofficial HP tool to upgrade firmwares. With this you do not have to create an ftpserver etc. Contact HP Support, they may give this to you.
This is meant to be used when the other ways does not work, but it helps out a lot as you do not have to set up an FTP/SCP server.
Sanloader used to (winter 2010) not work well on Windows 7 and may not work flawlessly on the pre 6.x firmwares.
- Set up a ftp/scp server and upgrade via the CLI (command line interface).
- Use DCFM ( Data Center Fabric Manager - now called Network Advisory ) to upgrade firmware.
- Firmware can also be upgraded through the web interface (click on switch admin and then on firmware download). You will still need an FTP/SCP server for this though. See the web tools admin guide page 73-74 (FOS 6.2.x but it hasn't moved).
FileZilla is a free FTP-server that works well. There are many alternatives around. But unfortunately some don't work sometimes (not 100% sure but probably combination of older FOS with older ftp client with FTP server that couldn't handle that client) as listed in the comments thread in this post. FileZilla is however still on sourceforge so you may want to be careful about installing that - it might contain malware. Storing them on a Synology NAS works - thanks Henny!
For FTP clients:
- /usr/bin/ftp in Ubuntu (also in Ubuntu on Windows)
- WinSCP for a free opensource Windows alternative that does both ftp and SCP (and more).
For SCP any machine with Linux and sshd on should work. You can also get an scp-server running on Windows, OpenSSH would work. Both protocols are old, SCP is safer while FTP is sending data in clear text.
Personally I like doing this via the CLI. The Network Advisor way gives you the possibility to upgrade in parallel, but that's also risky. If you use a Linux server to provide the firmwares via SCP don't forget to let the switches in via firewall or tcp.wrapper ( /etc/hosts.allow ). If you do the upgrade via ftp - make sure that passive and active ftp both works.
How to access the SAN-switch
The most common way is to access the CLI of a Brocade switch by connect to the IP of it with an ssh- or telnet-client, PuTTy is the name of a free Windows client. If you are comfortable with CLI, Windows 10 has WSL and a good ssh and scp client built in. Telnet is unsafe so do try to use the ssh at all costs. Windows 10 has Bash which is in my opinion much nicer to use than putty.
It's also possible to access the switch CLI via a serial cable, however as the firmware files are several 100MB (approaching 1GB for 6.4.x) that's not really viable when upgrading firmware. Hyperterminal is a free windows tool that comes by default in some Windows versions. You can also use PuTTy for serial access.
To access the web interface just point the web browser to . It requires Java. The Java version that's supported is listed in the release notes of the Fabric OS.
Here on HP's Support Forum are some more notes about v6.x. Basic steps:
Note: version 6 does not require to specify the exact folder location SWBDxx: it just needs the root containing "the install" file
1) Unpack the downloaded firmware in the FTP or SCP download directory
2) Start the FTP/SCP Server and allow access
3) Connect to the CLI of the switch via telnet or ssh
4) Type this in the CLI: firmwaredownload
5) Answer all questions: when it asks for File Name be sure to write /v6.4.1b, that is the folder under which you find all the SWBDxx folders. Failing to do so makes it impossible to download the firmware
6) Wait for reboot of the switch and reconnect, check the firmware version with the "version" command
More notes about the upgrade
CLI Command to start the update process is firmwaredownload - this starts the interactive version, it is possible to specify user, directory, host directly via the CLI. See the Command Reference Guide for details. There are reference guides for each major Fabric OS release.
Please use forward slashes when specifying directories.
For example when you unzip the firmware file and it creates a sub-folder in the FTP-root that is called v5.3.1a then you need to specify /v5.3.1a as the directory.
For firmwares prior to 5.3.x you have to specify the release.plist - /v5.2.2a/release.plist.
However it says in the release notes for 5.2.3 that release.plist is no longer needed.
In some cases you may have to specify the sub directory.
For example the 4/16 HP Switch is a Brocade 200E with switchtype 34. So you would then use directory SWBD34 - /v5.3.1a/SWDB34. You can also try with /v5.3.1a/release.plist, /v5.3.1a/SWDB34/release.plist or /v5.3.1a/install. However with 5.3.1a you should not have to so /v5.3.1a should be enough.
switch:admin> firmwaredownload Server Name or IP Address: IP.TO.SCP.SERVER User Name: username File Name: /path/to/v6.2.2e Network Protocol(1-auto-select, 2-FTP, 3-SCP) : 3 Password: Server IP: IP.TO.SCP.SERVER, Protocol IPv4 Checking system settings for firmwaredownload... System settings check passed. You can run firmwaredownloadstatus to get the status of this command. This command will cause a warm/non-disruptive boot on the switch, but will require that existing telnet, secure telnet or SSH sessions be restarted. Do you want to continue [Y]: y Firmware is being downloaded to the switch. This step may take up to 30 minutes. Preparing for firmwaredownload... Start to install packages... dir ################################################## [[lots of these for all packets]] ################################################## [[also stuff like these are seen many times:]] warning: /etc/fabos/pki/switch.0.rootcrt created as /etc/fabos/pki/switch.0.rootcrt.rpmnew kernel-module-ipsec ################################################## Removing unneeded files, please wait ... Finished removing unneeded files. All packages have been downloaded successfully. Firmware has been downloaded to the secondary partition of the switch. HA Rebooting ...
Transfer Protocol and Connectivity
If you are using SCP and that does not work, please try with FTP. If neither works, see if something else can log on to the FTP/SCP server. And of course, make sure the right permissions/root directory are set on the FTP-server. If your FTP/SCP server has log files, check them. If it works from one client but not from the switch, check the logs and see if there's a difference. Sometimes if the SCP doesn't work via CLI it might work by doing SCP (but starting it from the Web Tools, thanks Eric in the comments for this!).
If you are logged on as root on the SAN-switch you can use the scp- or ssh-client on the switch to confirm connectivity, like this:
ssh username@server ls /tmp/v6.0.1a to list the /tmp/v6.0.1a on the SCP server.
You need to be root to run the above command.
If that also does not work, you have some kind of networking problem - you can try direct connecting a laptop to the LAN interface of the switch. To see the network settings on the switch: ifmodeshow and ipaddrshow
Sometimes when upgrading from 6.1.1d to 6.2.2 we have seen that the passwords have gotten reset.
Default password is then "password" or "fibranne".
You can reset the password with the CLI command "passwd admin" to reset password on the admin account.
If you forget all passwords it might be possible to be able to reset it via the serial cable interface while booting the switch.
On EMC branded switches the default password might be: Serv4EMC
If your switch is out of warranty/contract and it's still working. I'd suggest making a copy(dd in linux for example) of the CF-card. Then if the CF card decides to fail you can just get a new one from random_electronic store and dd the contents of the flash back.
When replacing a switch make sure that the licenses are correct.
If for example you have a switch with 'power pack' - then for HP there is a special spare part number for a switch with power pack and one without. Power pack is a grouping of licenses, which licenses are in the pack differs between models.