Tag Archives: bcefp

BCEFP 2015 certified!

Passed the Brocade Certified Ethernet Fabric Professional 2015 exam in May and I finally got the results back!

https://www.certmetrics.com/brocade/public/transcript.aspx?transcript=8XRF1FE12MR41GC4

This one felt quite hairy compared to the other tests I’ve taken. Definitely recommend doing the course / getting some real hands-on experience for these certifications.

Brocade Certified Ethernet Fabric Professional

Brocade Certified Ethernet Fabric Professional – BCEFP – is available for free right now! I signed up and if you pass it you’re in the drawing for a $500 amazon coupon each week/month :)

Ethernet Fabric you say? “As a Brocade Certified Ethernet Fabric Professional, you must be able to demonstrate knowledge of IP, SAN, and FCoE concepts, “

What to focus on: http://community.brocade.com/t5/Certification/BCEFP-Exam-Preparation/m-p/56467

Nutshells: http://www.brocade.com/education/certification-accreditation/certified-ethernet-fabric-professional/index.page

To register for the exam, head over to the post on reddit. Basically there’s a pdf with the voucher you use when registering for the exam on pearsonvue.

Currently the “CEF 250” is free, but it’s not the main curriculum for the course.

Thoughts after Brocade’s Analyst and Technology Day 2012

Thursday today, the day after the Day. It was a real long day, and to my surprise it said ‘press’ on my pass – so I had to try to ask some questions :)

Some things picked up:

* New VDX 8770 product released – a modular Ethernet switch. Room for 384 10GbE ports. 100GbE ready and also ready for SDN protocols like VXLAN (vmware) and NVGRE (windows 2012). The VDX 8770 chassi is called “Mercury” internally in Brocade. I found it very similar to the DCX chassis  except that the supervisor modules are half-height.

* Today Brocade opened up registrations for the BCEFP certification – Brocade Certified Ethernet Fabric Professional (which include the VDX8770), It looks advanced and you probably want to take the previous exam – BCEFE – before.

* SDN – storage-defined network was the main focus of the day. Fibre Channel was barely mentioned at all.
Ken Cheng‘s (one of the VPs of Brocade) definition of SDN:

“A set of technologies which are focused on achieving three objectives: network virtualization (vxlan), programmatic control (openflow) and cloud orchestration (openstack).”

It was quite obvious that Brocade’s VCS is the technique/medium which they intend to enable these new technologies. SDN is still quite immature (even though internet2 are already using it in their production network) – so be prepared to wait if you want ready solutions.

* VCS seems quite similar to QLogic’s/Juniper’s QFabric. They had a hands-on lab where we could connect four smaller vdx switches and a vdx8770 (4-slot version). The switches had only had a unique ID set on them and their were end-devices (web-servers, web cams and a tablet) on different IP subnets on each switch. All I needed to do to connect switches (and devices) was to connect two switches via a fibre pair. Quite easy. Almost too easy to be true. This is something I really enjoy that’s part of Fibre Channel. The technology has quite a few features, self-forming trunks being one of them (with frames being striped over all members of a trunk). It also gets rid of spanning tree (so no more unused links).

* Quite soon we should see Brocade’s OEMs release embedded VDX switches for their blade chassis. No news yet about which but lately IBM have been quick to release new Brocade products. As a side note: Brocade from start only sold their gear through OEMs, this is no longer always the case and they are trying to communicate more directly with customers.

* Cost per bit was really important to push down for internet exchanges.

* It’s a lot easier to write a blog post on my wordpress blog via Chrome (on android) than via the native browser. Using my asus transformer tf101 as a note taking device for the day worked out great. Success!