Tag Archives: study material

BCFP 16G Beta Exam Material

After the announcement of the available material Fabric OS 7.0.0a has been released.

On the page http://community.brocade.com/docs/DOC-2041 only the first revision of the 7.0 release notes is available.

The BCFA 16G beta course material is also available, probably a good idea to read up on both and do a little rehearsing.

The old attachments are these:

  • 1860_FabricAdapter_DS.pdf (942.3 K)
  • FOS_TrblShoot_v700-02.pdf (1.8 MB)
  • FOS_CmdRef_v700.pdf (4.6 MB)
  • FOS_AdminGd_v700-02.pdf (7.2 MB)
  • FOS_FCIP_AdminGd_v700.pdf (2.8 MB)
  • NetworkAdvisor_SAN_InstallGd_v1110.pdf (450.3 K)
  • NetworkAdvisor_SAN_Manual_v1110.pdf (9.5 MB)
  • v7.0.0_releasenotes_v1.0.pdf (1.5 MB)
  • SH_Family_DS_03.pdf (157.7 K)
  • Brocade_Adapters_v2.3.0.0_Admin_Guide.pdf (1.5 MB)
  • AccessGateway_AdminGd_v700.pdf (919.0 K)

With my notes:

  • 1860_FabricAdapter_DS.pdf (this is just a brochure/data sheet of that product)
  • FOS_TrblShoot_v700-02.pdf (trbl and diag guide, 3 June 2011, 138p)
  • FOS_CmdRef_v700.pdf (cmd reference manual- 29 April 2011, 1132p)
  • FOS_AdminGd_v700-02.pdf (3 June 2011, 580p)
  • FOS_FCIP_AdminGd_v700.pdf (29 April 2011, 136p)
  • NetworkAdvisor_SAN_InstallGd_v1110.pdf (13 May 2011, 47p)
  • NetworkAdvisor_SAN_Manual_v1110.pdf (13 May 2011, 1301p)
  • v7.0.0_releasenotes_v1.0.pdf (29 April 2011, 125p)
  • SH_Family_DS_03.pdf (SAN Health Family, brochure/data sheet)
  • Brocade_Adapters_v2.3.0.0_Admin_Guide.pdf (27 October 2010, 292p)
  • AccessGateway_AdminGd_v700.pdf (29 April 2011, 102p)

The newer versions are not available if you have a registered account on my.brocade.com without any product registered to it. I’ve e-mailed Brocade asking for more access. In the meantime some are available on for example HP.com – but the Brocade release notes are not available there. And the HP Release notes for 7.0.0a have the HP names of the products.
On HP’s site you can go to the manuals for the 8/40 to get some more documents.

Actually it looks like the documents available are quite up to date. I guess the Admin Guides etc don’t update that often anyway. There is however a document in the manuals link above that explains that there have been some changes to some of the Brocade Documents. This might be worth checking out.

The conclusion of this little exercise is that the material available is currently good enough (for me).

Reading encrypted/password protected pdf on Linux

Brocade Logo

The problematic PDF

The CFP300 material on http://community.brocade.com/docs/DOC-2041 is encrypted so that it cannot be printed/re-edited without a password.

If you try to open this with evince (default .pdf viewer in Gnome) it will ask for a password.
pdftotext (comes with the software suite poppler) says:

Error: Weird encryption info
Error: Incorrect password

It’s only the material starting with M0* that has this issue, this has also been seen with other documents. Maybe this is because they were created with a too new version of Adobe Acrobat that evince/pdftotext doesn’t support.
The rest of the material are going to be public and they are user/admin guides anyway. But the M0* files are from the actual course material for the 16G so this is why.

The solution on RHEL6 x64: install FoxitReader. Download the .rpm – then hit ‘rpm -Uvh FoxitReader-1.1-0.fc9.i386.rpm’ and it will be installed. To start it just hit ‘FoxitReader’.

Anyway I think it’s nice of Brocade to pre-release the course material for those doing the beta-test. If you want the real material the cheapest is 650$ and then you get the material, narration of the pdfs (usually good quality, not just reading off the presentations) and a few quite good lab exercises.

The Studying

Just threading along here with the material, slowly but steady.
I’m starting with the NPIV / Access Gateway stuff. It’s a bit more complicated than just a switch that isn’t its own domain, it’s also mapping the virtual WWN to the N_ports (a switch in AG mode has N_ports that connect to F_ports in another switch). Usually N_ports are on hosts’ and targets’ ports and the switches’ has the F_ports.